Series Designations and Their Options

• WKL Sentry III Control series, with a digital LED thermostat mounted on the unit
• WKE Sentinel II Microprocessor Control series with remote monitoring ($105 more than WKL) - this system allows the inside fan to be left on for continual air circulation, helpful for odd-shaped rooms; the condenser speed varies based on temperature, making it more efficient; and the temperature control/monitor can be mounted remotely via a user-supplied telephone cable
• WKCE Series for Cabinets (see photo below, but with digital LED thermostat)
• WKSL Series (split system - see description in next section)
• Note:  The original WK, WKC, and WKS series with the mechanical thermostats were discontinued in 2010.  With one exception, the units above are the same size and capacity.

WKC2200 in Wine Cabinet
(Now available as WKCE2200 w/LED thermostat)
Note that when replacing these units, the power cord is on
the inside of the cabinet (as shown).  Some older units have
the power cord fed through the rear, and you will now
have to supply power via outlet or extension cord inside.
Note the cool air outlet on the bottom (left side), unique to this model.

Styles

• Through-the-Wall venting (WKL, WKE series):  Usually completely inside the house, which is the most common installation, but can occasionally be mounted on an outside wall; prices start at $695 plus shipping.  OPTION:  power Cord-On-Back mod (COB $70).  The power cord length is 4½'.
• For cabinets (WKCE series):  Small units intended for wine cabinets and small closets, as shown above; the air blows downward through the bottom.  OPTION:  hot air Vent-Through-Top (VTT $70).  There is no rear-cord option -- see note under picture above.  Please consult with us before ordering a replacement unit, as some vendors, like Vinothèque, have modified their units in various ways.  The power cord length is 4'.
• Split system (WKSL series):  condenser outside the house, fan and coil inside the wine room, connected together via a copper lineset and low-voltage wire; requires professional installation.  ASK US about things like maximum lineset lengths!  We can offer the very best deals on these units – best in the country, we believe!  And we can offer "tips" on installation you may not get elsewhere.

Models and Pricing

We offer units to handle wine rooms of six different sizes (cubic feet:  length x width x height).  In the table below, available models are identified.  The 4-digit number in each model indicates the number of BTUs.  NOTE:  If you have a room with a glass door or window, minimal insulation, or an above ground outside wall in warm climates, be sure to bump up your cubic foot requirement.  In any case, never undersize.  Call for assistance!

SHIPPING:  Units are shipped at actual cost (currently $25 to $90), please call!  Because of high air freight costs, units are shipped FedEx ground, though you can opt for 3-day air or even overnight.  See Availability below.

Note:  The two WKSL split system models are effectively sold as "parts."  You must have a licensed HVAC/Refrigeration installer supply the necessary connectors and charge the system with refrigerant.  The inside unit usually sits high on the wall and is not mounted through the wall.  It is intended to be hung on the wall, but it may also sit on a shelf (we recommend this approach).  Both components run on 120 VAC, but they are connected via a low-voltage wire (which was not true of the predecessor WKS units).  The WKSL models were redesigned in 2010 to take R134A refrigerant, which has increased installation flexibility but has shortened maximum line length.  Ask us about these restrictions on lineset length and other installation issues!  These are just some of the helpful hints you get by dealing with Bracksco!

Physical Characteristics

WKx Series:  6000/8000 left; 1060/2200 middle; 3000/4000 right
(electronic controls not shown)

WKSL4000:  Fan/Coil (inside unit) on left, Condenser (outside unit) on right
Note 4 holes to hang inside unit and location of connection holes lower left of rear cover

Installation Instructions

Some of links below redirect you to the Breezaire site so you get the latest updates.

• WKL, WKE, WKCE Series
• WKSL Series (current)
• WKS2200 (pre-June 2010, reference only)
• WKS4000 (Jan-May 2010, reference only)
• WKS4000-Old (2006-2009 models, reference only)

Warranty

• WKCE/WKL/WKE Series
• WKSL Series (split system)

Repair Options

• When units fail, they typically "freeze up" (frost on the cabinet) or run longer and longer with less cool air until cool air stops altogether.  These symptoms inevitably mean there is a refrigeration leak, and the leaking component must be replaced.  Your decision to repair or replace [this is a Bracksco opinion] will probably be driven by the age of the unit:  under 5 years, consider repair; 5-10 year:  50/50 choice; over 10 years:  replace!  Cabinet units tend to fail sooner than other units, probably because they are likely to run more, and most owners choose replacement at greater than 5 years.
• Warranty service is ONLY available from Breezaire in Southern California.
• If your unit fails during the first year, Breezaire pays for everything, including shipping in both directions, though you must pay for shipment to them, submitting a receipt for reimbursement.
• After the first year (for non-split systems), you have a five year warranty (e.g., 4 more years) on PARTS.  You pay for shipping in both directions plus labor.  YOU MUST SAVE YOUR ORIGINAL BOX FOR SHIPMENT!  (To ship from the East coast, a WKL2200 would cost about $65 each way; a WKL4000 about $85.)
• If you return your unit to Breezaire during years 2-5, they will diagnose the problem for free.  You will be told the cost of repair, which might vary from $100 to $500, and you can decide to have them repair it, return it unrepaired, or junk it.  If you junk it, note that Breezaire does not sell replacement units -- you must go though a dealer (like Bracksco).
• Except for split systems, units are sealed with rivets to avoid "tampering."  If the rivets are removed, the warranty is void, but this is what any repair person will have to do to service the unit locally for you at your expense.  An onsite diagnostic visit will probably cost you about $100 before repairs are made.  Suggestion:  ask in advance what a coil replacement or compressor replacement might cost to see if you are willing to pay that much.
• For split systems, the warranty is only for one year, and you will need to pay for parts, labor, and shipping if you return one of the two components after the first year.  Since these systems are non-riveted, fairly standard refrigeration units, you should be able to find a local refrigeration repair service to work on them, possibly obtaining parts from Breezaire.  NOTE that we can sell you a complete replacement for either the inside or outside unit, if you decide not to have it serviced or repaired or fully replaced.
• Technicians:  Except the the Triangle area of NC where we are located, we cannot help refer you to qualified technicians for repair -- sorry!

Availability

Breezaire cooling systems are custom manufactured and shipped directly from the factory in California to avoid duplicate shipping charges.  With the possible exception of WKSL4000 and modifications, models generally ship within a week or so of order.  Sorry, Breezaire coolers and parts are not returnable.

[TOP]